1954 Mercury heater diagrams, blowups, instructions etc.

This topic is empty.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
January 31, 2012 at 11:24 pm #1392

Anonymous
Inactive

I am looking for drawings and instuctions to replace the heating system in my car including the valves, vacumn hoses, cables etc. All the shop manual I’ve found don’t have a section on that for some reason.

Thanks,

Wayne Poe

February 2, 2012 at 1:51 pm #2756

Virgil & Sue Klein
Keymaster

Don’t know if this will help, but essentially ’52-’56 (except ’56 is 12 volt) are identical heating systems. The location of the control levers in the dash assembly are slightly different but the balance of the system is the same. I have done several of these systems so if you want to email me separately I will see if I can be of help. Email is virgil53@windstream.net

June 28, 2012 at 4:11 pm #2799

Anonymous
Inactive

There is vendor advertising on ebay a heater removal instruction under 1954 Mercury parts.

Phil Wert
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.